 |
|
 |
2) Bring band from the opposite side on the bottom with your right hand and place next to band |
 |
3) Bring one more band up from each side. |
 |
4) Find the band that is stamped “Jose” and grasp it between the thumb and forefinger of your right hand letting the original 4 bands fall to one side |
 |
5) Bring the band from behind the “Jose” band up and place it behind the “Jose” band. The two should fit together
|
 |
6) Place bands remaining on the bottom together and bring them up towards you so that the four bands are parallel. |
 |
7) Holding bands in your left hand between your thumb and forefinger, turn clockwise. |
 |
8) Continue turning bands until you have completed a 180-degree rotation |
 |
9) The bands should fit together holding the remaining 4 bands in place making an “x” if you turn the ring over |
 |
10) Take the first two bands on the side facing you and rotate the bands until the irregular shaped part is on the inside of the ring
|
 |
11) When you have completed the rotation, be sure that the “V” shaped part on the inside of the ring is over the remaining loose bands.
|
 |
12) Bring bands up and they will fit next to the other bands. |
 |
13) Turn ring around and start rotating the bands closest to you until the irregular shaped part is on the inside of the ring |
 |
14) When you have completed the rotation, be sure that the two bands are sitting next to one another.
|
 |
15) Bring bands up and it will fit next to the other bands.
|
 |
16) Bring the last band you put into place up so it is loose and place the loose band across it. |
 |
17) Turn the band so that the bar is facing your thumb. |
 |
18) This band will now fall into place on the opposite side |
 |
19) The remaining band will now fall into place. |
 |
Admire your puzzle ring ! |
