 |
1) Hold Band stamped 1 (rounded outside band) with the irregular portion up and in your left hand |
 |
2) Bring Band stamped 2 (other outside band) up against 1 band forming a diamond shape. Note these are the outside bands when the ring is assembled |
 |
3) Grasp band stamped 4and Jose in your right hand with the stamp facing towards you, allowing 1 band and 2 band to fall down to one side. This band is one of the bands that cross over the ring on a diagonal when the ring is assembled. |
 |
4) Bring 2nd band stamped 4 up behind Jose band. The two bands should fit together and act as one |
 |
5) Take two bands stamped 3 and fit together. They also act as one band. Bring the two bands up together towards you with your left hand until the bands are parallel. |
 |
6) Holding two 3 bands between your thumb and forefinger, turn bands clockwise |
 |
7) Continue turning until you have completed a 180-degree rotation. The bands should fit together, holding the two outside bands (1 and 2) |
 |
8) When the last step is completed, 3 and 4 should form an x. |
 |
9) Take the fist band on the same side which is 2 and rotate the band until the irregular shaped part is on the inside of the ring. |
 |
10) When you have completed the rotation, be sure that the V shaped part on the inside of the ring is over the remaining loose band. Bring band up and fit against 3 and 4. |
 |
11) Turn ring around and start rotating 1 until the irregular part of the band is on the inside. |
 |
12) When you have completed the rotation, bring 1 band up against the other three rings. |
 |
Admire your puzzle ring ! |
